Create a bootable ESX Server 3i USB flash drive
REQUIREMENTS
- 1 GB USB flash drive
- WinImage
- WinRare, 7-zip or IZArc
Of course you can use your favorite tools and larger USB flash drives, but 1 GB is enough space for the boot image.
Perform the following steps to create a bootable ESX Server 3i USB flash drive:
1.Download ESX Server 3i Installable ISO
2.Extract INSTALL.TGZ from the root directory of the ISO image
using an IZArc
3.Extract /usr/lib/vmware/installer/VMware-VMvisor-big-3.5.0-67921.i386.dd.bz2
from INSTALL.TGZ using IZArc
4.Extract VMware-VMvisor-big-3.5.0-67921.i386.dd from
VMware-VMvisor-big-3.5.0-67921.i386.dd.bz2 using IZArc
5.Attach the USB flash drive and make sure you no longer need
the data on it
6.Use WinImage to transfer
VMware-VMvisor-big-3.5.0-67921.i386.dd to the USB flash drive
1.Disk->Restore Virtual Hard Disk image on physical drive...
2.Select the USB flash drive (Warning: If you select the wrong
disk you will lose data!)
3.Select the image file VMware-VMvisor-big-3.5.0-67921.i386.dd
4.Confirm the warning message
5.Wait for the transfer to complete
7.Unplug the USB flash drive (Warning: If you forget to unplug
the flash drive from the PC you might lose the data on your hard
drives the next time you boot!)
8.Attach the USB flash drive to the machine you want to boot
(Warning: If ESX Server 3i recognizes local drives, you might
lose the data on it, so make sure you don´t need it anymore or
unplug all hard drives!)
9.Turn the machine on and make sure the USB flash drive is
selected as boot device
10.Watch ESX Server 3i boot
11.Configure
12.Enjoy!